The 7 3/8" high pull out shelves can be used to keep your cooking sheets upright and organized plus give you great access by allowing our shelves that slide to come to you. These kitchen pull outs are ideal for those kitchen cabinets or pantry cabinets that need extra height to store paper towel rolls, liquor bottles, pastries, tall cereal boxes etc. 

These pull out shelves also are available in a slant wall design. The back of the pull out shelf is 7 3/8" tall and it tapers to 2 3/8" tall in the front. The Slant pull out shelf is designed especially for pantry cabinets where you usually have a mixture of tall boxes and shorter canned goods. By placing the taller goods in the back of the pull out shelf, and the smaller canned goods in the front. You have a clear view of everything in the pantry and with pull out shelves, everything slides out for easy access.

Creating a pull out pantry with or roll out shelves can be a simple do it yourself project. Simply mark your pantry door location with it closed, then remove the pantry door and hinges. Install your new pull out shelves (making sure that they are within 1/8" of the pantry opening edge when they are installed). Using double faced tape that is meant for hanging mirrors ( this tape is thicker), put the tape on the top two corners of the top pull out shelf and at the bottom corners of the bottom pull out shelf. Carefully place the pantry door aligned with the marks made earlier, and press the pantry door solid against the pull out shelves, making contact with the double faced tape. Slowly open the pantry door, which will bring the two pull out shelves with it. From the back of the roll out shelf, insert a screw from the back of the roll out shelves into the thick part of the pantry door,top and bottom. Then roll out the remaining shelves to make contact with the pantry door and attach them to the door the same way.Push the pantry door back and when you open the door all out your pull out shelves will come with it, making a pull out pantry that can be easily accessed from either side.

Standard Features: Natural Finish 73/8" Tall Baltic Birch ply Sidewalls, Dadoe and Rabbet joint construction, Mdf bottom covered in white or maple look, 3/4extension steel epoxy coated standard drawer slides 100 lb weight capacity, Mounting screws

Optional Features: Full extension ball bearing slides +16.00, Clear Coating (3 coats of clear gloss lacquer)+9.00, Base Mount Brackets (4 L brackets with screws) +8.50, Half Shelf Mount (2 L brackets with screws) +4.25, Rear Sockets mount ( 2 rear sockets with screws) +3.00, Stained ( $16.00), Deep Shelves (23,24,25 and 26 deep), Slanted sidewalls +10.00

Installing our pull out shelves takes less than 5 minutes for the average do it yourself person. The pull out shelves ships completely assembled and requires just a screw driver to install.

Click on Images below for more information on product