Pantry Cabinet Pull Out Shelves

PLEASE READ OUR GUIDES PRIOR TO ORDERING

MEASURING GUIDE

INSTALLATION GUIDE

Our pantry cabinet pull out shelves can be ordered in 1/8" increments to give your cabinets a built in look. The sidewalls of our shelves are made from 1/2" 9 ply baltic birch ply. This is the same material that can be found in surfboards and skate boards.

All shelves have rabbet jointed corners that are glued and pin-nailed

Shelf bottoms are dadoed into the shelves sidewalls 1/2" up from the bottom and available in either white or maple look 1/4" mdf core melamine or 1/4" birch ply with a lacquered finish. However you choose be assured that any of our bottoms will withstand most heavy loads up to 75 lbs. Inside height of this shelf is approx 6 7/8", total height of sidewalls are 7 3/8" The optional base mount L brackets will raise this shelf 1/2"

Wide shelves have stiffener(s) installed underneath the shelf bottom for added strength

Standard Blum® drawer slides are included with each drawer that we make or you can choose to use your own slides by choosing the option under slide type. Full extension ball bearing drawer slides are also available in either standard or soft close style. Soft close will gently close your drawer the last 1-1 1/4" of its inward travel. Standard drawer slides are 3/4 extension slides i.e. a 20" slide will extend approx 15"

Unfinished sidewalls are hand sanded and ready to stain, paint or apply your own protection. All shelves should be finished in some manner to protect the wood from moisture and oils. Our clear coat lacquer finished sidewalls have a hard durable UV cured finish for ultimate protection and smoothness.

All shelves are rated for 100lbs static 75 lbs dynamic