Tall Kitchen pull outs, sliding shelves, roll out shelves

Breads, pastries, tall items of all kinds will fit well in this kitchen pullout shelf, One word of caution with this shelf, because of it's height , be careful that you are going to have enough room in a cabinet with a middle shelf. You will need a clearance of approx. 10" between the bottom shelf and middle shelf to install this roll out shelf. Our pull out shelves are constructed with rabbet joinery, joining the front and back to the sidewalls with this joinery puts the stress points of the kitchen pull out at the sidewalls rather than at the front wall of the pull out shelf. Therefore, you have a clean looking front sidewall because the roll out shelf is pin nailed from the sides rather than the front. All the side walls and bottom are glued to give added strength. The bottom of the pull out shelf is vinyl coated mdf. This bottom allows for cleaning with a damp rag without raising any grain. The sidewalls are Constructed of 1/2" baltic birch. The sidewalls can be ordered with Stain Grade Sides ( bare wood that can be stained or painted) or with a clear coat pre applied. The clear coat helps to protect the wood against body fluids blackening the surface and moisture deterioration.

Slanted pull out shelves are great for pantries. The sides slope from 7 3/8" in the back to 2 3/8" in the front, allowing better view of shelf contents and ability to stack taller items in the back with shorter items in the front. Available only in 19 3/4" and 21 3/4" depths